All you need to build a Prusa i3 1.75 kit. You can buy the original at Shop.Prusa3D.com

13 Questions View all

Extruder motor not working (?)

Hey guys,

So, after some heavy printing nozzle kept getting clogged so I decided to disassemble the whole extruder unit and clean it. I disconnected everything including thermistor and heater. After clean up conneceted everything back again and it was okay except one element I didn't even touch which is the extruder motor

What wrong? It works for 13/14 second and stops for another 14 second and it goes in a loop like that. Any idea what's wrong? I mean I didn't even mess with it :/.

EDIT

One more thing - I don't have problems with loading/unloading the filament. Also when I use the extrude button in Pronterface I can do it for as long as I want, way beyond the 14sec mark.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

I really will not be a specialist on this subject, but I think the error is on some sensor what is inside on extruder.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Cass will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 176