Replace hotend thermistor replacement process?I have a replacement thermistor for the hotend. I have been through diagnosis via email with support and the thermistor is no...
Answer to: Heat bed temp not working. How to reconnect wire?Most of the Kapton tape I have seen is golden in color. The tape and its adhesive are rated for pretty high temperatures. It is not unduly expensive, but it is not cheap. Thankfully you can purchase small quantities easily. In my experience, cleaning the area of application with alcohol (to get grease/oils off). Place the thermistor in place, apply the tape over it, and press it around the thermistor well to help ensure the thermistor and the tape make good contact with the back of the heated bed. ... I hope this helps.