After assembly only rectangles in LCD

I assembled the MMU step by step with the online manual.

After finishing is startet the MK2s and there are only rectangles in the LCD Menu, nothing happens.

When I Power off the printer, the Prusa Sign appears shortly and "saving files" and it turned off. Nothing more.

I tried to update firmware, but there is an time out error in the software.

What can i do?

Block Image

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Hi Julian,

was the LCD working before the upgrade to MMU?

I suggest to check the wires, it might be some connector is loose.

Regarding the timeout, I suppose you are on Windows, try step 5:

Upgrading firmware v1.2

Was this answer helpful?

Score 0
Add a comment

If it's a i2C LCD, there will be a little potentiometer (blue with a screw) It control contrast of the LCD. Try to unscrew it while the LCD is powered, This settings change between LCD i think ...

Was this answer helpful?

Score 0
Add a comment

Add your answer

Julian Stigler will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 16

All Time: 16