The Original Prusa i3 MK3 is the successor of the award-winning Original Prusa i3 MK2 3D printer.

49 Questions View all

XYZ calibration fails immediately

I to have a calibration problem. I did the preflight settings, in the calibration wizard I got a OK on the self test. When the xyz calibration starts it immediately fails and suggests checking my axis. I have tried all that I have read here with no success. I did update the firmware as well

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Okay took the extruder head apart reassembled it still no go...turns out a loose wire on the PINDA probe plug on the intsy. I see the RED LED....

Was this answer helpful?

Score 0


is calibration working for you now?


Yes it calibrated and is working a-okay. it was not running calibration due to the PINDA not working


Add a comment

Add your answer

Rick Lawrence will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 28

All Time: 214