Skip to main content
  1. This manual is for the Original Prusa i3 MK3 only! In case you have a new model MK3S, please proceed according to Original Prusa i3 MK3S kit assembly v3.13
    • This manual is for the Original Prusa i3 MK3 only! In case you have a new model MK3S, please proceed according to Original Prusa i3 MK3S kit assembly v3.13

    • The kit includes:

    • Needle-nose pliers (1x)

    • Philips screwdriver (1x)

    • Allen key (6x)

    • No soldering is required.

    • No wire crimping is required.

  2. All the boxes and bags including parts for the build are labelled.
    • All the boxes and bags including parts for the build are labelled.

    • Number (or numbers) in the header tells you for which chapter you'll need that bag (or box).

  3. Most of the labels are scaled 1:1 and can be used to identify the part :-)
    • Most of the labels are scaled 1:1 and can be used to identify the part :-)

  4. Every type of fastener is included in a separate special bag.
    • Every type of fastener is included in a separate special bag.

    • If you lose a screw when building, use one from this bag.

  5. When you browse the guide on manual.prusa3d.com, you can view the original  images in high resolution for clarity.
    • When you browse the guide on manual.prusa3d.com, you can view the original images in high resolution for clarity.

    • Just hover your cursor over the image and click the Magnifier button ("View original") in the top left corner.

  6. Starting with Original Prusa i3 MK3 most of the printed parts are marked with their version.
    • Starting with Original Prusa i3 MK3 most of the printed parts are marked with their version.

    • In case you have issues while assembling the printer with the certain printed part, please try to find this label and tell it to our support team.

  7. Lost in the instructions, missing screw or cracked printed part? Let us know! You can contact us using following channels:
    • Lost in the instructions, missing screw or cracked printed part? Let us know!

    • You can contact us using following channels:

    • Using comments under each step.

    • Using our 24/7 live chat at shop.prusa3d.com

    • Writing an email to info@prusa3d.com

    • You can start by assembling Y-axis in the next chapter - 2. Y-axis assembly

Finish Line

49 other people completed this guide.

Jakub Dolezal

Member since: 02/20/2017

225 Guides authored

Team

Prusa Research Member of Prusa Research

Community

3 Members

367 Guides authored

3 Comments

Hallo Autorenteam,

bis auf den Link im Abschnitt 7 verweisen alle Links für das nächste Kapitel auf die Einführung.

Gruß

Kai

Kai - Reply

Sehr gut alles gemacht. In meiner Lieferung hat zwar der einfache Schraubenzieher gefehlt, aber das macht nix;-)

Uwe Grunewald - Reply

Prima erste Erklärung und ein sehr hilfreies System mit den Nummern und Tüten. Bin schon gespannt, wie lange der Zusammenbau bei mir dauert.

Bernd Lauterbach - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 21

Past 30 Days: 61

All Time: 7,644