Skip to main content
  1. Go to Arduino.cc Download and run Windows Installer.
  2. Go to http://www.prusa3d.cz/wp-content/uploads... and download FW
  3. Connect the printer to the computer and note the COM port. You can use HW manager to find out. Open the folder Marlin-RAMBO-MINI13-e3d-newmenu-EN. Open file Marlin-RAMBO-MINI13-e3d-newmenu-EN (It has arduino icon)
    • Connect the printer to the computer and note the COM port. You can use HW manager to find out.

    • Open the folder Marlin-RAMBO-MINI13-e3d-newmenu-EN.

    • Open file Marlin-RAMBO-MINI13-e3d-newmenu-EN (It has arduino icon)

  4. Under Tools -> Port choose your printer COM port. Recheck if RAMBo is selected under Tools > Board.
    • Under Tools -> Port choose your printer COM port.

    • Recheck if RAMBo is selected under Tools > Board.

    • Click Upload.

    • Wait for Done uploading and you are done.

Finish Line

One other person completed this guide.

Dozuki System

Member since: 09/24/2009

726 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 13

Past 30 Days: 62

All Time: 1,993