Skip to main content
  1. WARNING: Current profiles were tested on the Simplify3D (S3D) 4.1.2 and we can not guarantee those will work on the older versions.
    • WARNING: Current profiles were tested on the Simplify3D (S3D) 4.1.2 and we can not guarantee those will work on the older versions.

    • The following guide will help you import and activate custom profiles tweaked by Josef Prusa for your Original Prusa i3 printer.

    • This guide is valid both for Microsoft Windows and Apple macOS.

    • Important: latest profiles include settings for generic PLA, ABS, PETG as well as Prusament.

    • Supported printers:

    • Original Prusa i3 MK3S and MK3

    • Original Prusa i3 MK2.5S, MK2.5 and MK2S

    • Click here to download the S3D package

  2. The package for S3D includes just two config files, which will be imported in few clicks :) Make sure the Simplify3D is installed and running. The Prusa printers, which are in the list aren't officially supported, we will import the correct ones in the next step.
    • The package for S3D includes just two config files, which will be imported in few clicks :)

    • Make sure the Simplify3D is installed and running. The Prusa printers, which are in the list aren't officially supported, we will import the correct ones in the next step.

  3. From the top menu select File -> Import FFF profile Head to the folder with downloaded profiles and select the one according to your printer. Wait for the S3D to confirm, the import was successful.
    • From the top menu select File -> Import FFF profile

    • Head to the folder with downloaded profiles and select the one according to your printer.

    • Wait for the S3D to confirm, the import was successful.

  4. Open the Processes dialogue and in "Select Profile:" select your Original Prusa printer.
    • Open the Processes dialogue and in "Select Profile:" select your Original Prusa printer.

    • We are ready! Slice your model and give it a try ;)

Finish Line

13 other people completed this guide.

Jakub Dolezal

Member since: 02/20/2017

214 Guides authored

Team

Prusa Research Member of Prusa Research

Community

3 Members

355 Guides authored

2 Comments

Je supr, že po dlouhé době někdo aktuallizoval! Díky moc za to, kdyby byla možnost více presetů pro filamenty, nebylo by to špatný. Bohužel stále se potýkám s tím, že profil ze Slicu je absolutně nekompatibilní s FFF. A na opisování profilů, respektive přepisování, sem lenoch :( Nebo aspoň profily pro trysky 0.6, 0.5, 0.4, 0.25, nebylo by to špatnéé. Ještě jednou díky za práci navíc :)

Filip Povysil - Reply

Dobrý den, na dalších presetech se pracuje, ale obávám se, že to není uplně priorita (tou je náš vlastní slicer).

Martin L. - Official Prusa CS -

Add Comment

View Statistics:

Past 24 Hours: 113

Past 7 Days: 786

Past 30 Days: 3,204

All Time: 3,211