Skip to main content

Introduction

The Original Prusa i3 MK2S is constantly evolving. Based on your feedback and improvements from Josef Prusa's team, the printer is getting new features and redesigned parts for easier assembly. All the changes are described below. In case you need help, please ask below the particular step in online manual or contact our support team.

  1. Versions of the MK3 manual:
    • Versions of the MK3 manual:

    • Initial version 2.0

    • Updated to version 2.01

    • Updated to version 2.02

    • Updated to version 2.03

    • Updated to version 2.04

    • Updated to version 2.05

    • Updated to version 2.06

  2. Chapter 7 - Textile sleeve
    • Chapter 7 - Textile sleeve

    • Assembly of the heatbed with the textile sleeve updated. In case the wires aren't soldered user has to tighten the cable to the heatbed using M3 screws and nuts.

    • Manual version 2.06

Finish Line

5 other people completed this guide.

Jakub Dolezal

Member since: 02/20/2017

225 Guides authored

Team

Prusa Research Member of Prusa Research

Community

3 Members

367 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 32

All Time: 719