Skip to main content

Changes to Step #7

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Mounting the heatbed-cable-cover [Tłumaczenie w toku]
[* green] Place the heatbed-cable-cover on the heatbed to cover the soldered cables and LED.
[* blue] Tighten the cover to the heatbed using M3x10 screw and Allen key. Be careful not to pinch (break) any wires from the heatbed!

Image 1

No previous image

Added

Image 2

No previous image

Added