Skip to main content

Changes to Step #13

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Mounting the heatbed (part 1) [Tłumaczenie w toku]
[* black] Push the Y-carriage to the front and place the Heatbed behind.
[* green] Locate a hole the centre of the Y-carriage.
[* blue] Place one spacer on the top of the hole.
[* icon_note] The exact position of the spacer will be adjusted in the next step.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added