Skip to main content

Changes to Step #14

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Mounting the heatbed (part 2) [Tłumaczenie w toku]
[* green] Push the Allen key through the middle hole on the Heatbed and place it above the spacer. Use the Allen key to align all parts.
[* light_blue] After the alignment insert the M3x12b(14b) screw instead.
[* violet] Tighten the screw just slightly.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added