Skip to main content

Changes to Step #15

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Mounting the heatbed (part 3) [Tłumaczenie w toku]
[* black] Move to the right side of the heatbed.
[* green] Place another spacer with the pliers.
[* light_blue] Push the pliers between the heatbed and the Y-carriage.
[* violet] Use the Allen key to align the spacer.
[* orange] After the alignment insert the screw instead and tighten it slightly.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added