Skip to main content

Changes to Step #16

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Mounting the heatbed (part 4) [Tłumaczenie w toku]
[* green] Using pliers insert spacers and screw into the remaining holes. DON'T fully tighten the screws.
[* black] After all screws are in place, tighten them in the following order:
[* light_blue] Center screw
[* violet] First four screws (edges)
[* yellow] Last four screws (corners)

Image 1

No previous image

Added

Image 2

No previous image

Added