Skip to main content

Changes to Step #20

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Assembling the PSU (part 2) [Tłumaczenie w toku]
[* violet] Slide the PSU holders under the PSU cover.
[* orange] Secure the PSU with two M3x10 screws. Don't tighten them completely. You want to be able to move the PSU on the mount to properly line up the other mount.
[* yellow] Re-seat the PSU and then tighten all four screws.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added