Skip to main content

Changes to Step #2

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Printer's maintenance (optional) [Traduction en cours]
[* black] Before we proceed further in the upgrade to MK2.5 it is a great time for quick maintenance.
[* blue] Move the bearings to side, to create a longer path for cleaning the smooth rods.
[* black] Take a cloth/towel and wipe the smooth rods. Focus on the parts next to the X-ends where most of the dust is accumulated.
[* black] You can also apply a little bit of general purpose machine oil on the smooth rods and move the bearings back and forth a couple of times.
[* black] Regular maintenance is described in the [https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk25_en.pdf#page=58|Handbook for MK2.5], see chapter 12.1

Image 1

No previous image

Added

Image 2

No previous image

Added