Skip to main content

Changes to Step #3

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] The X-carriage preassembly [Traduction en cours]
[* black] For the following step, please prepare:
[* yellow] X-carriage for MK2.5 (1x)
[* violet] M3nS nut (5x)
[* red] Zip tie (2x)
[* blue] Insert nuts in the traps, as in the second picture. Ensure proper alignment with Allen key.
[* green] Insert zip ties in the slots as shown in the last picture.
[* icon_note] Note: Design of your X-carriage printed part might slightly differ, but the assembly process is the same.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added