Skip to main content

Changes to Step #6

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Assembling the X-axis belt (part 1, new design) [Traduction en cours]
[* green] Insert the flat part of the X-GT2 belt (850 mm) into the X-carriage as in the picture.
[* icon_note] Use a screwdriver or the smallest Allen key to push the belt in.
[* icon_note] Your design of the x-carriage might slightly differ. It does not affect the belt assembly.

Image 1

No previous image

Added