Skip to main content

Changes to Step #13

Edit by Dozuki System

Edit approved by Dozuki System

Deleted
Added
Unchanged

Step Lines

[title] Assembling the X-axis belt (part 1, old design) [Traduction en cours]
[* green] Insert the flat part of the X-GT2 belt (850 mm) into the X-carriage as in the picture.
[* violet] Press the belt all the way in, use a screwdriver or an Allen key.
[* icon_caution] It's very '''IMPORTANT''' that the short end of the belt isn't sticking out of the X-carriage.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added