Anybody get continuous timeout messages doing this? This is from a Raspberry Pi running OctoPrint. I did hit the "disconnect" button in the OctoPrint web interface to try to prevent port conflicts.
pi@octopi:~ $ avrdude -c stk500v2 -b 115200 -p Atmega2560 -v -P /dev/ttyACM0 -D -U flash:w:1_75mm_MK2-RAMBo13a-E3Dv6full.hex:i
avrdude: Version 6.1, compiled on Jul 7 2015 at 10:29:47
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/pi/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyACM0
Using Programmer : stk500v2
Overriding Baud Rate : 115200
avrdude: stk500v2_ReceiveMessage(): timeout
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.