Help
| 0 | Guides |
| Member Since 09/19/2017 | |
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
| Event | Count | Delta |
|---|---|---|
| Post was voted up | 1 | 12 |
Had to use a spare 40mm screw to pull the M3 nut foreward and jam it into the trap in order that the green 30mm screw would bite. Took me a rebuild of the assembly to understand the problem.
Same problem here, one hole too small for the smooth rod, will have , will have to try to sandpapering