Absolutely impossible for me to get the cables in to the hole with the TEXTILE sleeve on. Had to widen the hole; the clips had still 3-4 distance to each other - no chance to screw them together. And, yes, I did use the right clip.
Thanks, did the same!
The designer of this case should be punished by inserting the top left screw for at least ten times ;-)
It’s not only the X-axis cable but also the X-axis endstop cable which should be wrapped with the textile sleeve.
Took me 30 minutes - but can’t suggest a time (error code 403)
Regarding “What STL files to print”:
If I want to use the 45° angled nozzle fan only, then I do NOT need to print the file “nozzle-fan.stl” anyway. Correct? All other STL files seem to be the same between the two steps with the number 4 (spiral vs. textile).
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.